My friend has a horse who is in rehab and needs lots of work over poles. Last week she laid some poles out on a diagonal to add some variation because he concentrated more when trotting diagonally over the poles and we talked about ideas to make trotting poles more interesting.
Twenty four hours later, I was teaching a pair of siblings. The weather was awful so I didn’t want to jump, yet also didn’t want to bore them with flatwork (one pony has the attention span of a gnat on a hot plate unless there’s jumps involved and to be honest, the weather wasn’t conducive to having an argument with a napping pony) so I opted for trotting poles.
The horse in this lesson tends to rush poles so I needed to make him think and slow down, and I wanted to improve everyone’s suppleness and agility.
I laid the poles out in an S-shape. Three parallel, at 4’6″ apart, then three on a slight left bend, with the centre off the poles 4’6″ apart. A further three bearing round to the right, and then three more parallel poles to finish. I measured the distances to the centre of each pole, and the first three and last three poles were parallel to each other.
This meant that in order to maintain the same trot, with regular strides, the horses had to bend left and right. I find that if you do trotting poles on a curve then the horse is liable to drifting out, which is of no benefit to anyone. By putting in the double twist the horses couldn’t fall out by more than a stride, because as soon as they did, they had to change their bend.
We worked through the poles until my riders were riding the twist accurately, added a little impulsion to help their horse through the change of bend, stayed central to the poles, and their horses didn’t fit any extra strides in (this happens when they fall out because the distance between the poles is greater). The pony was clever, and initially adjusted his stride so he could do minimal bend, yet not clip a pole. So I made his rider aware of this, and be firmer with his steering aids so they met each pole in the middle.
I was really pleased that the other horse did not rush the poles, and you could see him thinking about the exercise. He wasn’t quite as clever with his feet and if he didn’t get the twist just right, he clipped a pole. His rider just needed to support him more, and close the leg on the turns to help him maintain his trot stride.
Once the twisted trotting poles were easy, I started raising them. I raised three at a time, at alternate ends. I wanted the slanted poles to focus my riders to the centre; and make it more obvious when the horses cheated and went straight, because they would clunk over the high ends of the poles. When the last three parallel poles were raised it caused very little issue, except highlighting when the horses lost impulsion. They soon picked up their feet though, so I raised the next three, which were on the right turn. Again, it made it obvious when the horses weren’t central and they were more likely to roll the poles.
By the end of the lesson all twelve poles were raised and the horses were negotiating S-shape easily, bending nicely and being very active in their trot. To finish, I asked my riders to trot large on each rein and feel and describe the difference to the trot. Both came back saying the trot felt more active, energetic, and with bigger strides. I thought both horses also looked like they’d found some abdominal muscles and had lengthened their necks where they were less tense.
It was really pleasing to see how they all focused and thought about the exercise, and you could really see a difference to the way the horses moved afterwards. Now to find a few more different interesting pole work exercises for my friend!